Table of Contents
Advertisement
S7 / OPMI VISU 160
Failure of the zoom function
Version 6.0
G-30-1528-en
Failure of the zoom function
In the event that the zoom function can no longer be controlled via the foot
control panel, adjust the zoom factor manually at the microscope.
• Use the manual zoom adjustment (1) of the microscope to set the magni-
fication required (if necessary, use a tool, e.g. a screwdriver, coin, etc.).
Malfunction of the zoom function
The zoom function performs uncontrollable settings.
• Turn off the system at the power switch.
What to do in the event of malfunctions
1
Page 157
Advertisement
Chapters
Table of Contents
