Connecting The Strain Relief Device - Zeiss S7 / OPMI VISU 160 Instructions For Use Manual

Preparations for use

Connecting the strain relief device

1
4
Page 124
Use the strain relief device to prevent the connected cables from being pulled
out inadvertently.
• Form the cable into a loop (2).
• Open flap (3).
• Feed the cable through the opening (4).
• Close the flap (5).
• Tighten the cable until it encloses the flap (6).
2
5
3
6
S7 / OPMI VISU 160
7
Version 6.0
G-30-1528-en