S7 / OPMI VISU 160
Requirements for operation
Prior to the very first use
Version 6.0
G-30-1528-en
A ZEISS Service representative or an expert authorized by ZEISS will install the
system. Please make sure that the following requirements continue to be met
for further operation:
The connecting components have been properly connected. The screw
connections have been firmly tightened.
All cables and plugs are in perfect condition.
The voltage set on the system corresponds to the rated line voltage on the
site of installation.
The power cord being used is the one designed for use with this system.
When connecting the device to any network, please ensure the network
is free of dangerous voltages.
More specific information about the floor stand:
The main plug must only be connected to a socket with
a faultless protective ground conductor.
More specific information about the ceiling mount:
The ceiling anchor has been correctly installed by the competent construc-
tion personnel.
This ceiling anchor complies with the specifications contained in our print-
ed "Planning Manual".
The device may only be connected to a power supply network which has
a faultless protective ground conductor.
Safety Measures
Page 13