Zeiss S7 / OPMI VISU 160 Instructions For Use Manual page 104

System Overview
Foot control panel
1 2 K
A
C
I
G
E
Page 104
The foot control panel permits you to control various functions of the suspen-
sion system and surgical microscope. The assignment of the functions to the
buttons on the foot control panel is shown on the following pages.
You can only control functions which are implemented in the system config-
uration used (suspension system, surgical microscope). Only use the foot con-
trol panels listed here and in the ordering data.
– Foot control panel with 14 functions, wireless (FCP WL)
– Foot control panel with 14 functions, cable-based (FCP), 3m (option)
– Foot control panel with 14 functions, cable-based (FCP), 6m (option)
Structure
1 Connectors
for connecting the connection cable with the connector panel of the
stand.
B
2 Silver-colored bracket
for storing the foot control panel on the stand.
D
Controls
J
– Buttons A, B, C, D, E, F
H
– Joystick K
Joystick K is used to control the XY coupling.
F
– Rocker switches G, H, I, J
The rocker switches are used to operate the "Zoom" and "Focus"
functions.
Storage
When not using the foot control panel, you can attach it to the column of the
floor stand using the silver-colored bracket.
S7 / OPMI VISU 160
Version 6.0
G-30-1528-en