The hand indicates hints on the use of the instrument or other tips for the user. ® OPMI is a registered trademark of Carl Zeiss Surgical GmbH. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
– Foot control panel with 14 functions – Foot control panel with 8 functions Preparations for use Attaching the equipment Connections – Connecting the surgical microscope G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 4
– Adjusting the monitor arm – Care of the unit – Cleaning mechanical surfaces – Sterilization – Disinfecting the control keys – Disposal – Ordering data – Accessories G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 5
– Spare parts – Ambient requirements Technical data – Technical data Index G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 6
G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Functions at a glance Functions at a glance S8 floor stand with lifting column G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
15 Connecting the foot control panel, connecting the remote page 58 control connector 16 Rated voltage display page 36 17 Connector panel page 36 18 Switching on the suspension system page 58 G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 9
Functions at a glance 14 15 16, 17, 18 G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 10
Functions at a glance G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Safety Safety Notes on installation and use Safety devices of the suspension system Warning labels and notes G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Safety The device described in this manual has been designed and tested in ac- cordance with Carl Zeiss safety standards as well as German and inter- national standards. This guarantees a high degree of instrument safety. The system described in this user manual has been designed in compli- ance with the requirements of: –...
Page 13
Use this instrument only for the applications described. • Only use the instrument with the accessories supplied. Should you wish to use other accessory equipment, make sure that Carl Zeiss or the equipment manufacturer has certified that its use will not impair the safety of instrument.
Page 14
The system meets the EMC requirements of IEC 60601-1-2. During use of the system, the precautionary measures concerning EMC listed below must be observed. Only use accessories that have been approved by Carl Zeiss for this system. Do not use any portable or mobile high frequency communication devices in the vicinity of the system, as this may lead to an impairment of its func- tion.
Page 15
– Ensuring that the navigation system is only connected by person- nel who have undergone appropriate training and instruction. – Contacting the local Carl Zeiss representative for any inquiries that may arise. – Implementation of a procedure that guarantees the calibration of the surgical microscope which is absolutely vital for the use of the Carl Zeiss components "Surgical microscope on suspension sys-...
Page 16
– The instrument is plugged into a power outlet which has a properly connected protective ground contact. – The power cord being used is the one designed for use with this in- strument. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 17
• Since the xenon lamp provides high light intensity and generates light with a spectrum similar to daylight, it must not be used for ophthalmic applications. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 18
Always use the main power switch of the instrument to turn it off. • The main power switch must always be turned off when the instrument is not in use. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 19
Safety G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
When locked, the suspension arm can no longer suddenly spring up- ward when insufficient weight is attached. After attaching a unit, per- form the balancing procedure. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 21
Safety G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 22
– by the motorized movement of the lifting column, – by the motorized focusing system, – by the movement of the suspension arm. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 23
Safety G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 24
Push the lamp module all the way back into the lamp housing. • Reset service hour counter (6) to "0". Use a pointed object and press it into the recess of reset button (5). G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 25
Safety G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 26
4 Manual function When the manual function has been activated, all electrical control systems are disabled. The bulb brightness is automatically adjusted to a fixed setting. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 27
Safety G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 28
Press the Manual key once again to reactivate electronic control; the display in the display and key field then returns to the basic mode. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 29
Safety G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
If any label is missing on your instrument or has become illegible, please contact us or one of our authorized representatives. We will supply the missing labels. OPHTHALMOLOGY G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 31
Safety G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 32
Safety G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Xenon illumination system Instrument tray (option) Video monitor (option) Foot control panel (option) Intended use Design Foot control panel with 14 functions Foot control panel with 8 functions G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 34
Description G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
S8 floor stand with lifting column Intended use The floor stand is a carrier system for Zeiss surgical microscopes for al- most all surgical disciplines. It is used to power and control the motorized functions of a surgical microscope. The hallmarks of the floor stand are its superb mobility and easy operation.
Therefore, move the stand slowly and care- fully! Design 1 Control panel 2 Carrier arm 3 Lamp housing with Xenon illumination 4 Suspension arm 5 Motorized stand lifting column 6 Stand base G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 37
Description G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 38
You have to pull out the lamp module all the way before being able to swing in the backup lamp. Warning! The suspension system with xenon illumination must not be used for oph- thalmic procedures. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 39
Description G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
The four steerable casters on the stand base permit easy positioning in the OR. 8 Cable support (2x) for winding up the power cord and the cable of the foot control panel. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 41
Description G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
5 A. 7 Power inlet socket 8 Power switch S2 When the stand is on, the green indicator light in the switch is lit. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 43
The strain relief device prevents inadvertent unplugging of the fol- lowing electrical connections: – power cable, – connecting cable for foot control panel, hand control panel or op- erating chair with appropriate footswitch. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
After pressing any one of the keys, you can move the articu- lated arm as required. When you release the key, the magnetic brakes lock all axes simultaneously. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 45
Description G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
"MODE" key and "STORE" key The "MODE" and "STORE" keys permit you to access the different modes of the user interface. For details, please see the chapter "Operation". G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 47
The "MANUAL" key permits you to switch to manual operation. For de- tails, please see the chapter "Operation". Yellow LED above the "MANUAL" key The yellow LED is lit when you have switched to the manual mode. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Push the lamp module all the way back into the lamp housing. • Reset service hour counter (5) to "0". Use a pointed object and press it into the recess of reset button (6). G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 49
Description G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 50
Turn knob (2) through 180° until it snaps in. This moves the backup lamp into the illumination beam path. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 51
Description G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 52
You can adjust the selector in such a way that you can switch the illu- mination on/off on the right-hand and left-hand sides of the foot control panel. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 53
Description G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
– Remember there is a risk of collision in the maximum swivel position of the lift arm (transport position). – Be careful of heights when passing through doorways. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 55
Description G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Description Video monitor (option) The S88 floor stand can be equipped or retrofitted with a TFT monitor (1). In the case of retrofitting, our service staff or an authorized person will in- stall the TFT monitor on your suspension system.
Page 57
Description G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 58
– Always use a normal camera image for automatic image adjust- ment. Do not use the test image which is displayed directly after power-on or when no camera head is connected. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 59
Description G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 60
This is an analog interface that transmits the component video signal via three channels (red, yellow, green cinch connector). Each channel transmits one of the primary colors. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 61
Description G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 62
Compensate for the loss of gas by readjusting the gas pressure spring as described on page 154. If the TFT monitor continues to move downward, the gas pressure spring is defective. • Notify our service representative. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 63
Description 360° 90° ±90° 45° G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
The foot control panel is provided with a waterproof rubber cover. The illustration shows the 14-function foot control panel. Depending on the configuration involved, an 8-function foot control panel can also be connected. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 65
Description G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Reducing magnification, increasing the field of view) 9 FOCUS : Reducing the working distance 10 Button D: Function as assigned in configuration mode 1 11 Button B: Increasing the lamp brightness G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
: Increasing the working distance (alternatively ZOOM Reducing magnification, increasing the field of view) 8 FOCUS : Reducing the working distance 9 No function 10 Increasing the lamp brightness G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 68
Description G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Attaching the equipment Connections Connecting the surgical microscope Connecting the S light guide Mounting the strain relief device Connecting the suspension system Positioning the stand Relocating the unit G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Slide the coupling (2) on the microscope shaft (8) from above. Screw in the mounting screw (5) from above and tighten the securing screw (4) firmly using a 4 mm Allen key. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 71
Preparations for use G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 72
(3), (4) and (7) have been tightened firmly. Note: When mounting surgical microscopes with an integrated coupling, steps 3 to 9 need not be performed. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 73
Preparations for use G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
(7) of the microscope, and press the light guide into the cable clip (6). Note: Make sure that the light guide is not stretched or kinked when the micro- scope is turned or tilted. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 75
Preparations for use Surgical microscope shown rotated G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 76
Press the light guide into an empty position of cable holder (2). • Remove cap (1) from the light guide. This prevents melting of the cap in case the second illuminator is switched on by mistake. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 77
Preparations for use G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Feed the cable through opening (5). • Close flap (6). • Tighten the cable until it encloses flap (7). • Check the length of the cable. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 79
Preparations for use 320 mm G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Connect the stand to line power using the power cord intended for it. Only use power outlets which are provided with a properly connected protec- tive ground contact. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Please also read the section " Relocating the stand ". Caution: Press the brake on the stand base and make sure that the stand is se- curely locked in position and cannot roll away. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Caution: Over longer distances (e.g. removal, return for repair, etc), the instrument must always be transported in the original packaging or in special return packaging. For details, please contact your dealer or the Carl Zeiss service team. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0...
Page 83
Preparations for use G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 84
Preparations for use G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Operating the OPMI® PRO magis What to do in an emergency Failure of a xenon lamp Failure of lamp control Failure of focusing system Failure of magnetic brakes G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
– by the motorized movement of the lifting column, – by the motorized focusing system, – by the movement of the suspension arm. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 87
Operation G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
(2), adjust the spring force in such a way that the effort required to move the arm up or down is the same in both directions. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 89
Operation G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Turn the adjustment screw (1) clockwise as far as it will go. • Move the surgical microscope again to the lower limit and check the safety distance. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 91
Operation G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Limitation of downward travel – Check that the minimum working distance (height) from the surgical field has been set using the adjustment screw for limiting downward travel. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 93
If a function fails, you must not use this instrument for safety reasons. Cor- rect the fault (see the "Troubleshooting table“) or contact our service dept. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
The function of the "STORE" key is dependent on the surgical microscope used. For details of the "STORE" key, see the user's manual of the rele- vant surgical microscope. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 95
Press the "MANUAL" key once again to reactivate electronic control; the display in the display and key field then returns to the basic mode. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 96
Make sure never to change the settings of another user. It is therefore ad- visable that you only use your own user ID for your work. Remember that all settings made are stored under the user ID currently selected. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 97
You can continue using the illumination system, but the lamp brightness is automatically adjusted to a fixed setting. You can use the foot control panel to switch the illumination system on and off. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
SETTINGS 5 MODE: AF-CCD AF-ROI SIZE AF-ROI Y-POS. MODE STORE MANUAL 1/2" SIZE SMALL MODE STORE MANUAL V-FOC. MODE STORE MANUAL MODE STORE MANUAL MODE STORE MANUAL G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 99
The special functions of the SpeedFokus (autofocus) option comprise: – Video-AF mode (MENU B), complete – AF-ROI SIZE function in configuration menu 3 (SETTINGS 3) G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 100
The associated buttons "∇" and "Δ" allow you to change the settings in de- fined steps. Saving parameter settings As soon as you have entered a parameter setting, it is saved under the current user ID. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 101
In configuration mode 1, you can assign the increase/reduce bright- ness function to the freely configurable keys on the handgrip. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 102
Path: To access the speed mode (MENU A), press the MODE button in the basic mode. To change to configuration mode 1 (SETTINGS 1), press the MODE and STORE buttons simultaneously. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 103
For further details, please see configura- tion mode 2. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 104
(MENU A), or do not press any button for 20 seconds. To change to configuration mode 1 (SETTINGS 1), press the MODE and STORE buttons simultaneously. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 105
The magnetic brakes of the suspension system are unlocked for as long as you press one of these release buttons. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 106
Autofocus mode (MENU B) or if you do not press any button for 20 seconds. To change to configuration mode 1 (SETTINGS 1), press the MODE and STORE buttons simultaneously. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 107
FOOT RIGHT D: Use the middle display and key field (FOOT RIGHT D:) to assign one of the possible functions to button D of the foot control panel. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 108
If you press button (1) for less than 2 seconds, focus positioning is trig- gered; if you press the button for more than 2 seconds, the current focus G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 109
1 (SETTINGS 1), or do not press any button for 20 sec- onds. To change to configuration mode 2 (SETTINGS 2), press the MODE and STORE buttons simultaneously. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 110
The best effect of dy- namic speed control is achieved if an adjustment speed of <4.0 has been selected in the speed mode. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 111
As a result, the tissue in the surgical field may be subjected to excessive radiation. You will not be aware of this while looking through the surgical micro- G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 112
20 seconds. To change to configuration mode 3 (SETTINGS 3), press the MODE and STORE buttons simultaneously. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 113
Use menu item "EYE PIECE:" to select one of the eyepiece magnifica- tions available. Roll-over procedure: → 16x → 10x → ↑ ↓ ← ← 12,5x G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 114
A few seconds after your last ac- SIZE SMALL tion, the frame disappears from the screen. STORE MANUAL MODE G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 115
20 seconds. To change to configuration mode 4 (SETTINGS 4), simultaneously press the MODE and STORE buttons in configuration mode 3. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 116
The SpeedFokus (autofocus) option does not func- Y-POS. tion properly if parameters have not been correctly set. V-FOC. You can select the relevant focal length from the values offered. MODE STORE MANUAL G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 117
STORE MANUAL Path: To return to the basic mode, press the MODE button in the config- uration mode, or do not press any button for 20 seconds. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
If no key is pressed within 20 seconds, the program auto- matically returns to the basic mode. Note: The illustration shows the factory-adjusted default values to which you can reset your specific settings if required. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 119
ID. Notify all users of any changes, or make sure that each user only works under his own user ID. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 120
As soon as you have made a setting, the setting is accepted and saved under the current user number. Exception: the brightness setting cannot be saved. It is reset to level 0.1 at the next power-on of the system. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 121
For further details, please see configura- tion mode 1. Saving parameter settings As soon as you have entered a parameter setting, it is saved under the current user ID. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 122
Path: To return to the basic mode, press the "MODE" key in the speed mode or do not press any key for 20 seconds. To switch to configuration mode 1, simultaneously press the "MODE" and "STORE" keys. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 123
Use the middle section of the display and key field (FOOT RIGHT D:) to assign one of the possible functions to key D of the foot control panel. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 124
(C or D) of the foot control panel. The optical system of the Stereo Diagonal Inverter (SDI) 2E from Oculus is moved into and out of the beam path of the surgical microscope. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 125
(joystick or one of the two rocker switches). Triggers an AUX signal, e.g. for switching an external unit on or off. PHOTO Triggers the shutter of a 35 mm camera, if connected. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 126
HIGH MEDIUM G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 127
Path: To return to the basic mode, press the "MODE" key in configuration mode 1 or do not press any key for 20 seconds. To switch to configuration mode 2, simultaneously press the "MODE" and "STORE" keys. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 128
ID. Notify all users of any changes, or make sure that each user only works under his own user ID. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 129
Path: To return to the basic mode, press the "MODE" key in the configu- ration mode or do not press any key for 20 seconds. To access the next configuration mode 3, simultaneously press the "MODE" and "STORE" keys. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
If no key is pressed within 20 seconds, the program auto- matically returns to the basic mode. Note: The illustration shows the factory-adjusted default values to which you can reset your specific settings if required. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 131
ID. Notify all users of any changes, or make sure that each user only works under his own user ID. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 132
Each of the three default speeds can be set between the minimum of 1 STORE MANUAL MODE and the maximum of 10 in steps of 0.5. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 133
Path: To return to the basic mode, press the "MODE" key in the speed mode or do not press any key for 20 seconds. To switch to configuration mode 1, simultaneously press the "MODE" and "STORE" keys. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 134
ID. Path: To return to the basic mode, press the "MODE" key in configuration mode 1 or do not press any key for 20 seconds. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 135
Operation G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
If the first xenon lamp fails, you can open lamp module (2) as follows: • Press button (4). The lamp module is slightly ejected. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 137
Operation G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 138
If the first lamp has failed and the backup lamp is in use (red segment in knob (1) lights up), make sure to have a backup lamp module ready at hand as a precaution. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 139
Operation G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
If the magnetic brakes fail (magnetic brakes are locked), you can manu- ally position the articulated arm including the microscope by overcoming the locking effect of the magnetic brakes. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 141
Operation G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 142
Operation G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Changing the xenon lamp module Adjusting the monitor arm Care of the unit Cleaning mechanical surfaces Sterilization Disinfecting the control keys Disposal Ordering data Accessories Spare parts Ambient requirements G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
OR illuminator. Contact service dept. Yellow indicator lamp in dis- Defective main and backup Change lamp insert play field lights up. lamps. backup lamp module. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 145
Floor not level. Stand base Slightly turn stand base. Ar- appropriately posi- ticulated arm should be po- tioned. sitioned at a right angle with tilt axis. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 146
Setting of diopter rings on • Set diopter rings to zero monitor, unfocused eyepieces been or to the correct value. image in surgical micro- changed. scope. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 147
1 and assign the trol panel (on foot control AF (Autofocus) function panel with 8 or 14 func- to foot control panel but- tions). ton C or D. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 148
Image is not centered. A signal source is present Perform automatic image page 58 on the VGA port, and no au- adjustment. tomatic image adjustment has been performed. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 149
Image is too dark or too A signal source is present Perform automatic image page 58 bright. on the VGA port, and no au- adjustment. tomatic image adjustment has been performed. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Remove the old module and install the new lamp module by proceed- ing in the reverse order. • Check the function of the xenon lamp and backup xenon lamp. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 151
Maintenance / Further information G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 152
Carl Zeiss service agency. Note: • Only use the original transport case (2) as it also provides explosion protection, should xenon lamps be defective. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 153
Maintenance / Further information G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Tighten all of the four securing screws (6) of the ball joint by turning them clockwise until the TFT monitor remains in the required position. Note: After adjustment, please check whether the TFT monitor remains in the required position. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 155
Maintenance / Further information G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Wipe off any residue with a mixture of 50% ethyl alcohol and 50% distilled water plus a dash of household dish-washing liquid. Sterilization The asepsis sets available from Carl Zeiss contain rubber caps, sleeves and handgrips which can be sterilized in autoclaves. We recommend the following program for sterilization: Sterilization temperature: 134°...
To be able to use the system in the OR, for example, it may be necessary to disinfect the control keys. We recommend using MELISEPTOL disin- fectant solution (B. Braun, Melsungen AG). Carl Zeiss keeps MELI- SEPTOL in stock, and you can also obtain it locally in many countries from representatives of B.
This symbol is only applicable in the European Union. For the disposal of electrical and electronic devices, please observe the relevant national legislation and other regulations applicable in your country. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Maintenance / Further information Ordering data S88 floor stand with lifting column Description Cat. No. S88 floor stand with lifting column 305952-9950-000 Coupling for VISU and PRO magis 305952-8030-000 Xenon illumination system 000000-1174-212 S light guide, 2.0 m 303481-9020-000 Complete replacement lamp module with 2 xenon lamps in transport container and with return card;...
Page 160
Maintenance / Further information SpeedFokus (autofocus) option for OPMI Vario on S8 or S88 suspen- sion system Description Cat. No. SpeedFokus (autofocus) option in S8 / S88 000000-1227-873 Prerequisite: Previously installed video system. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0...
Please observe the following: Only operate the instrument with the accessories included in the delivery package. If you want to use other accessories, make sure that Carl Zeiss or the manufacturer of the accessories has proved and confirmed that these accessories meet the respective technical safety standards and can be used without risk.
BNC (VBS) connection cable, 10 m long (2x) 301687-9101 Y/C connection cable (plug - plug), 5 m long 300-281 Y/C extension cable, 5 m long HAMA Cat. No. 42734 G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Rel. humidity 30%...75% Air pressure 700 hPa...1,060 hPa For transportation and Temperature - 40 °C...+70 °C storage Rel. humidity 10%...100% (without condensation) Air pressure 500 hPa...1,060 hPa G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 164
Maintenance / Further information G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 165
Technical data Technical data Technical data G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 166
Technical data Technical data S88 floor stand with lifting column Mechanical data Suspension arm Length...850 mm Swivel angle...320° Vertical lift...± 360 mm Carrier arm Length...450 mm Swivel angle...320° Stand height 1880 mm ... 2410 mm Base 805 x 805 mm (length x width) Admissible max.
Page 167
Technical data G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 168
The system meets the EMC requirements of IEC 60601-1-2. The system meets the RFI requirements of Class A (hospital grade). The system has been designed for continuous operation. G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 169
(H x W x D) S-Video mode, Composite mode Resolution Refresh rate (HZ) Description 640 x 480 640 x 480 NTSC 720 x 576 720 x 576 G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 170
800 x 600 VESA 800 x 600 VESA 800 x 600 VESA 1024 x 768 1024 x 768 VESA 1024 x 768 VESA 1024 x 768 VESA G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 171
Admissible max. 9.0 kg load on the monitor Total weight Approx. 4.13 kg Subject to change. 360° 90° 180 mm 354 mm ±90° 45° 440 mm G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 172
Technical data The unit meets the essential requirements stipu- lated in Annex I to the 93/42/EEC Directive go- verning medical devices. The unit is marked with: G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 173
Care of the unit Carrier arm, back of CCD array, entering the size of CCD position CE marking Checklist Chip size, entry of Cleaning mechanical surfaces G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 174
Failure of a function Failure of a xenon lamp Filter selector knob FOC-MEM 107, 108, 123 Focus memory Focus speed, OPMI Vario Focusing process 121, 132 Focusing speed G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 175
Lamp failure Lamp module LCD display LCD display field Locking cap of arm cover Magnetic brake failure Magnetic brakes for XY und Z movement Magnetic brakes, selection G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 176
Preparations for use Problem Protective ground contact Re-equipping the instrument Release bar Relocating the unit Remote control socket Repeat function Requirements for operation Retrofit kits Risk of fire G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 177
Surgical microscope on suspension system S-Video connector 24, 136 Switching to the backup lamp 165, 166 Technical data TFT monitor Thermal injury Total magnification or working distance, OPMI Vario G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 178
X-Y coupling speed, OPMI Vario 121, 132 X-Y coupling, speed XY movement X-Y recentering XY recentering mechanism, focus and zoom XY und Z movement XY-INV XY-RES XYZ-RES G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 179
Index 26, 52 Yellow indicator lamp Yellow LED for "MANUAL" Z movement Zoom memory 121, 132 Zoom speed Zoom speed, OPMI Vario G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 180
Index G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...
Page 181
G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0 Printed on 28. 01. 2009...