Zeiss S7 / OPMI VISU 160 Instructions For Use Manual page 76

System Overview
Page 76
Carrier arm, stand column, stand base
1 Control and display panel
The control and display panel permits you to control all electrical functions
of the S7 floor stand.
2 Friction
Use this knob to adjust the friction of the swivel movement of the carrier
arm.
3 Grab handle
for moving the floor stand.
4 Connection panel
for connecting the system to line power. Further connectors are provided
for powering peripheral equipment. The foot or hand control panel can be
connected to a multi-point connector.
5 Friction
Use this knob to adjust the friction of the swivel movement of the suspen-
sion arm.
6 Cable clip
for winding up the power cord and the cable of the foot control panel.
7 Bracket for foot control panel
8 Locking tab
for steerable caster (4 casters are provided).
At least three locking tabs must be pressed down to secure the stand in
position.
- Press down to lock the caster.
- Press up to release the caster.
9 Steerable caster
The four casters roll very smoothly, permitting the unit to be easily
wheeled to the site of use.
S7 / OPMI VISU 160
Version 6.0
G-30-1528-en