Connector Panel - Zeiss S7 / OPMI VISU 160 Instructions For Use Manual

System Overview

Connector panel

Page 90
1 Opening for the system cable from an external video camera
2 Remote socket
for controlling external devices (e.g. MEDIALINK 100) with a max.
breaking capacity of 24V / 0.5A.
3 Connector for control component (option)
Here, a foot control panel can be connected. Alternatively, a wall socket
is available for this purpose (option). If a wall socket is used, the connector
on the suspension system is disabled.
4 Strain relief device
The strain relief device prevents inadvertent unplugging of the following
electrical connections:
– video connecting cable (option),
– connecting cable for the foot control panel.
5 Display window for rated voltage
The voltage shown here must correspond to the rated line voltage pro-
vided on the site of installation. You can adjust the sliding switch using a
suitable tool.
6 Wall socket, on-wall version
7 Wall socket, in-wall version
S7 / OPMI VISU 160
Version 6.0
G-30-1528-en