Labels On S7 Floor Stand - Zeiss S7 / OPMI VISU 160 Instructions For Use Manual

Safety Measures

Labels on S7 floor stand

max. 14 kg
- Balance +
Page 30
1 "Risk of crushing" label
Fingers may be pinched between the carrier and suspension arms. Do not
touch this area while the surgical microscope is being moved.
2 "Maximum load" warning label
The maximum load on the suspension arm must not exceed 14 kg.
3 Friction adjustment
Indication for friction setting
4 "Friction of suspension arm's upward/downward movement" label
Label on the knob for adjusting the friction of the suspension arm's up-
ward/downward movement.
5 "Balance setting" label
Balance setting must be performed after all accessories have been
mounted on the microscope.
6 "Friction of suspension arm's swivel movement" label
Label on the knob for adjusting the friction of the suspension arm's swivel
movement.
7 "Friction of carrier arm's upward/downward movement" label
Label on the knob for adjusting the friction of the carrier arm's upward/
downward movement.
S7 / OPMI VISU 160
Version 6.0
G-30-1528-en