Pairing With The Wireless Foot Control Panel (Fcp-Wl) - Zeiss S7 / OPMI VISU 160 Instructions For Use Manual

S7 / OPMI VISU 160

Pairing with the wireless foot control panel (FCP-WL)

NOTE
Version 6.0
G-30-1528-en
Pairing means the fixed relative assignment of the suspension system and foot
control panel.
It is required for wireless operation. On first-time pairing, it may take up to
20 s until the radio link between the suspension system and the foot control
panel has been established.
Foot control panel non-operational!
If pairing is performed incorrectly or not at all, the foot control panel may be
disabled, or activation of a control may trigger functions on a different sus-
pension system not assigned to the foot control panel.
• Perform pairing.
• If the foot control panel continues to be non-operational after pairing,
connect it to the system via a 3 m or 6 m cable.
Proceed as follows for pairing:
A
• Switch on the suspension system.
• Place the foot control panel in a vertical position (A) in the immediate vi-
cinity of the suspension system (distance less than 1 m).
• Start pairing as described in the Instructions for Use of the foot control
panel (FCP-WL).
Preparations for use
Page 125