Notes For The Operator - Zeiss S7 / OPMI VISU 160 Instructions For Use Manual

Safety Measures

Notes for the operator

Legal regulations
Ambient requirements
Page 10
The correct use of the device is absolutely vital for safe operation. Therefore,
please thoroughly familiarize yourself with the content of these Instructions
for Use before starting up the system. Please also observe the Instructions for
Use of any additional equipment. You can obtain additional information from
ZEISS Service.
• Only operate the device within the scope of its intended use.
• Only personnel who have undergone training and instruction are allowed
to use this instrument. It is the responsibility of the customer or institution
operating the equipment to train and instruct all staff using the equip-
ment.
• Please keep these Instructions for Use where they are easily accessible at
all times for the persons operating the system.
• Please observe all symbols and labels attached to the device (see Page 26)!
• Only use original accessories or consumables approved by Carl Zeiss.
• Observe the legal regulations for accident prevention and occupational
health and safety applicable in the country concerned.
• This equipment must not be modified without the manufacturer's approv-
al. If the equipment is modified after consulting the manufacturer, appro-
priate examinations and tests must be performed to guarantee the further
secure use of the device.
The manufacturer is not liable for any damage caused by unauthorized use
of the equipment.
• If required by the regulations and directives applicable in the country of
use, connect the system to a special emergency backup power supply.
• Do not operate the system contained in the delivery package
– in explosion-risk areas,
– if inflammable anesthetics or volatile solvents such as alcohol, benzine
or similar chemicals are present at a distance of less than 25 cm.
• Do not station or use the instrument in damp rooms. Do not expose the
instrument to water splashes, dripping water or sprayed water.
• Do not place any fluid-filled containers on top of the instrument. Make
sure that no fluids can seep into the instrument.
S7 / OPMI VISU 160
Version 6.0
G-30-1528-en