Notes For The Operator - Zeiss KSK 150 FC Instructions For Use Manual

KSK 150 FC

Notes for the operator

Version 7.1
G-30-1158-en
• Please thoroughly familiarize yourself with the contents of the Instructions
for Use before starting up the system. Please also observe the Instructions
for Use of any additional equipment.
• Only personnel who have undergone appropriate training and instruction
are allowed to use this device. It is the responsibility of the customer or
the company operating the device to train and instruct all operating per-
sonnel.
• Keep the Instructions for Use available at all times for the operating per-
sonnel.
• This device must not be modified without the manufacturer's approval. If
the device is modified, suitable inspections and testing must be completed
to ensure that it can still be used safely.
The manufacturer is not liable for damages caused by unauthorized use of
the device. Furthermore, this will forfeit any rights to claim under warran-
ty.
• Never open the device! The device contains freely accessible live compo-
nents. If you remove the housing, you run the risk of electric shock.
• Modifications and repairs of this system or any systems operated together
with this system may only be performed by our service representative or
by other authorized persons.
• Only use the system in accordance with the intended use.
• Note the symbols and labels attached to the system! Please refer to the
chapter on "Safety measures" and the section on "Labeling, warnings,
notes and symbols".
• Observe the applicable legal accident prevention and occupational safety
provisions of your country.
• If required by the applicable national laws and regulations, connect the
device to the special "equivalent power supply".
• Ensure that the installation conditions and the use of the device meet sur-
gical requirements:
– Low vibration
– Clean environment
– Avoid extreme mechanical loading
Safety Measures
Page 9