Otto Bock Kenevo 3C60 Introduction Manual page 91

Alignment and adjustment
Connecting the AXON tube adapter
Mind the plug polarity and
the arrows on the end of
each plug!
Alignment and adjustment | Kenevo 3C60 | Prothetik | Global Academy | 12.12.2016
•
Connect the tube adapter plug
to that of the Kenevo (the two
plugs have an arrow on their
ends which have to be
congruent in the connected
state)
•
Coil the protruding cable and
push it gently into the tube
adapter
•
The printed scale must face
anteriorly after assembly
| © Ottobock 91