Otto Bock Kenevo 3C60 Introduction Manual page 135

BionicLink PC
Using 2 BionicLink PC for bilateral fitting
If TWO BionicLink PC dongles are available and two Kenevo have to be
adjusted, it is possible to work parallel with TWO instances of the adjustment
software (e.g. bilateral fitting):
1. Left
Example
for bilateral
fitting
2. Right
Alignment and adjustment | Kenevo 3C60 | Prothetik | Global Academy | 12.12.2016
•
Open the DataStation twice and
select K-Soft in each window)
•
Connect to the first component
with the first instance of the
adjustment software
•
Connect to the second component
with the second instance of the
adjustment software
From Windows 7 it is possible to
use two BionicLink PC dongles
connected to one computer
| © Ottobock 135