Otto Bock Kenevo 3C60 Introduction Manual page 105

Alignment and adjustment
Socket reference point
•
Position socket in a neutral position
•
Indicate the middle of the socket by
drawing a distal and proximal
midpoint by means of the 50:50 gauge
(743A80)
•
Draw a line through both points to the
top of the socket
•
Find IT level and mark it on the line
•
Socket reference point = IT level + 30
mm
Alignment and adjustment | Kenevo 3C60 | Prothetik | Global Academy | 12.12.2016 | © Ottobock 105