Overheating Mode - Otto Bock Kenevo 3C60 Introduction Manual

User Instructions

Overheating mode

Reduce activity until the hydraulics have cooled down!
Otherwise the knee joint may be damaged.
•
Caused by heavy use of the knee joint (e.g. long
downhill walking)
•
Overheating is indicated by long vibrations every
5 seconds
•
Reaction of the knee joint depends on the
temperature increase:
−
Stance phase flexion resistance increases
(with increasing temperature)
• Consequence → User has to walk slowly
User Instructions | Kenevo 3C60 | Prosthetic | Global Academy | 29.01.2019 | © Ottobock 154