Otto Bock Kenevo 3C60 Introduction Manual page 172

Service And Warranty Concept
Checklist – Error case 1/3
1. Is the prosthesis correct aligned?
2. Is the knee joint correct adjusted?
3. Does the knee joint really have an error?
•
Rerun the self-test
→ Connect the charger and wait for signals
→ Disconnect the charger and wait for the signals
of self-test (do not move the knee joint during
the self-test)
•
Identify error or feedback signals emitted by the
knee joint (see the module "user instructions")
•
Contact OB Helpline (note the error signals of the
knee joint)
Service and warranty concept | Kenevo 3C60 | Prosthetic | Global Academy | 22.11.2020 | © Ottobock 172