Otto Bock Kenevo 3C60 Introduction Manual page 110

Alignment and adjustment
Shorten the tube adapter during alignment
How to disconnect the tube adapter without
activating safety mode:
•
Connect the charger and then disconnect
the tube adapter with the charger still
connected (as long as the charger is
connected, no safety mode will be activated)
OR
•
Switch off the Kenevo by connecting and
disconnecting the charger 3 times
•
Disconnect the tube adapter, shorten the
tube, smooth the cut edge, connect the
cable again and refresh the data in K-Soft
Alignment and adjustment | Kenevo 3C60 | Prothetik | Global Academy | 12.12.2016 | © Ottobock 110