Otto Bock Kenevo 3C60 Introduction Manual page 151

User Instructions
Safety modes – Reasons
When receiving an error signal, stop all activities with
•
Error from one or more of the sensors (AXON tube
adapter, IMU etc.)
OR
•
Self-test error after disconnecting the charger:
→ Connect and disconnect the charger to restart the
knee joint (possible to do this multiple times). If the
error remains, please contact the OB helpline
OR
•
Empty battery
the prosthesis immediately
User Instructions | Kenevo 3C60 | Prosthetic | Global Academy | 29.01.2019 | © Ottobock 151 151