Otto Bock Kenevo 3C60 Introduction Manual page 218

Mode C
Exercise for yielding
Yielding = Flexion of the knee joint under load against a
hydraulic resistance
Improve trust in stance flexion resistance
1. Place prosthesis in front and hold onto parallel bars,
support the user
–
Push in knee flexion direction to get a feeling for the
flexion resistance and the behavior of the knee joint
2. Repeat the exercise with less support
–
Let the user push into flexion as far as she/he is able to
stabilize her-/himself
–
Check if the user is able to get back to hip extension
independently
User training | Kenevo 3C60 | Prothetik | Global Academy | 02.12.2020 | © Ottobock 218