Otto Bock Kenevo 3C60 Introduction Manual page 148

User Instructions
Bicycle ergometer mode
>15°
Activating:
•
Flex the knee joint (easier with an activated sitting
function)
•
Put the feet on the pedals and perform pedaling
movements (~2 rotations), or activate the bicycle
ergometer mode using the Cockpit app
•
After switching into the bicycle ergometer mode, a
short beep and vibration signal is produced
→
This signals are emitted periodically in intervals
during pedaling movement until the resistances
in the flexion and extension direction have been
reduced to the extent that the knee joint moves
freely
User Instructions | Kenevo 3C60 | Prosthetic | Global Academy | 29.01.2019 | © Ottobock 148 148