Otto Bock Kenevo 3C60 Introduction Manual page 171

Service And Warranty Concept
Service procedure
In both cases the adjustments have to be checked and the values
have to be adjusted if necessary!
•
After maintenance, a label is attached to the knee that
will brief the CPO about the retention of the knee joint
adjustments
•
It is not always possible to preserve the adjusted
values during the service process
→ therefore the adjustments are reset to the factory
defaults (yellow label)
→ the individual settings have to be adjusted again
by loading them from K-Soft
•
A blue label signifies that the data has been preserved
Service and warranty concept | Kenevo 3C60 | Prosthetic | Global Academy | 22.11.2020 | © Ottobock 171