Otto Bock Kenevo 3C60 Introduction Manual page 170

Service and warranty concept
Service procedure
•
CPO and user are responsible for sending in the
components on time
•
Customer receives loaner unit from the service
center
•
Components to be sent in:
−
Knee joint + tube adapter (do not dis-
assemble and keep the knee head
extended!)
−
AC adapter and inductive charger
−
Service pass
•
Turn off the knee joint:
→
(3x connect and disconnect the charger that
is also connected to the wall socket)
Service and warranty concept | Kenevo 3C60 | Prosthetic | Global Academy | 22.11.2020 | © Ottobock 170