Otto Bock Kenevo 3C60 Introduction Manual page 31

Basic functions
Donning function (Mode A/B/B+)
Technical process
•
5 sec. after successful self-test, the
knee joint switches the flexion
resistance to a minimum
•
Self-test starts after
disconnecting the inductive
charger
•
After one-time flexion or after
applying load on the prosthesis, the
knee joint switches back to the
chosen activity mode (A/B/B+/C)
Functional benefit
•
Prosthesis can be flexed one time without
flexion resistance
•
Easier donning of the prosthesis while sitting
•
After donning the prosthesis in sitting position or
donning while standing, the prosthesis can be
loaded safely
Basic functions | Kenevo 3C60 | Prosthetic | Global Academy | 08.11.2018
S
| © Ottobock 31