Otto Bock Kenevo 3C60 Introduction Manual page 43

Basic functions
Intuitive bicycle ergometer mode
Technical process
•
In Mode A/B/B+ (locked in flexion
direction), the knee joint must be
flexed before starting
→
Usage of sitting function
•
After at least 2 full rotations of the
pedals, the knee joint switches to a
free-swinging knee joint
•
The knee joint switches immediately
back to the adjusted activity mode as
soon as the knee flexion is <15°
Functional benefit
•
Sitting function should be activated: The knee
joint can be flexed easier to the necessary
flexion and the initial cycling motion is easier to
perform
•
Intuitive usage of this function
•
The prosthesis can be loaded directly and
safely and the knee joint shows its usual
behavior
Basic functions | Kenevo 3C60 | Prosthetic | Global Academy | 08.11.2018
S
| © Ottobock 43