Otto Bock Kenevo 3C60 Introduction Manual page 131

Alignment and adjustment
Data overview – Data transfer 2/2
The saved data can
be transferred to the
knee joint by clicking
2
this button
This message will pop up. When confirming
with 'OK', the data will be transferred. The
knee joint gives out beep and vibration signals.
3
Alignment and adjustment | Kenevo 3C60 | Prothetik | Global Academy | 12.12.2016
1
After service it is
possible that the
knee joint has been
set back to default
settings
| © Ottobock 131