Otto Bock Kenevo 3C60 Introduction Manual page 109

Alignment and adjustment
Bench alignment with osseointegration
Necessary alignment optimizations (e.g. in case of a hip flexion
contracture) have to be compensated within an acceptable range
using an adapter authorized by the implant manufacturer!
•
In this special case there is no socket used for
bench alignment
•
Generally the bench alignment of the prosthesis is
independent from the kind of connection to the
joint
knee
•
For osseointegration the socket reference point
(SRP) matches the greater trochanter of the femur
Alignment and adjustment | Kenevo 3C60 | Prothetik | Global Academy | 12.12.2016 | © Ottobock 109