Otto Bock Kenevo 3C60 Introduction Manual page 114

Alignment and adjustment
Calibration of the Kenevo
Before the static alignment control with the
user, the Kenevo must be calibrated via K-Soft:
•
Tighten the screws with the required torque!
•
Calibrate the Kenevo the first time before
the user dons the prosthesis
→
Ensure that the prosthesis is
completely unloaded
The Kenevo must be calibrated again
after ANY changes of alignment!
Alignment and adjustment | Kenevo 3C60 | Prothetik | Global Academy | 12.12.2016 | © Ottobock 114