Otto Bock Kenevo 3C60 Introduction Manual page 137

BionicLink PC
Using ONE BionicLink PC for two components 2/2
After the adjustment of the first component, the second component has to be
adjusted:
1. Left
Example
for bilateral
fitting
2. Right
Alignment and adjustment | Kenevo 3C60 | Prothetik | Global Academy | 12.12.2016
•
Do not close the whole job of
the first instance of adjustment
software, but instead
disconnect the knee joint from
the software (Tab "Connection"
und button "Disconnect")
•
Connect the second
component to the second
instance of the software
•
Make the further adjustments
using the same procedure
→
Makes adjustment faster
•
Save both jobs when
completed
| © Ottobock 137