BionicLink PC
Using ONE BionicLink PC for two components 1/2
If just ONE BionicLink PC is available or a second BionicLink PC is not be
detected by the computer but two components have to be adjusted (bilateral
fitting):
1. Left
Example
for bilateral
fitting
2. Right
Alignment and adjustment | Kenevo 3C60 | Prothetik | Global Academy | 12.12.2016
•
Open the DataStation twice
and select K-Soft in each
window
•
Connect to the first component
with the first instance of the
software and adjust the
settings
| © Ottobock
136