Priority Watch - Icom IC-T3H Instruction Manuals

Priority watch

Priority watch checks for signals on "priority channels" while oper-
ating on a VFO frequency.
D Memory or call channel watch
While operating on a VFO frequency, memory or call channel watch
monitors for signals in the selected memory or call channel every
5 sec.
q
the desired memory channel or the call channel.
Select
w
Push [D•
CLR
e
Push [7•
PRIO
• VFO is displayed, then the decimal point ".", on the frequency read-
out flashes.
• The priority channel is monitored every 5 sec.
• When the signal is detected on the priority channel, the watching
is paused according to the setting of the scan resume condition.
r
Push [D•
CLR
D Memory scan watch
While operating on a VFO frequency or the call channel, memory
scan watch monitors for signals in each memory channel in se-
quence, every 5 sec.
q Push [C•
MR
• "X" appears.
w Push [5•
SCAN
e Push [7•
PRIO
• VFO is displayed, then the decimal point ".", on the frequency read-
out flashes.
• When the signal is detected on the priority channel, the watching
is paused according to the setting of the scan resume condition.
r Push [D•
CLR
] to select VFO mode.
] after pushing [A•
] to stop watching.
] to select memory mode, if necessary.
] after pushing [A•
] after pushing [A•
] to stop the watching.
SCAN OPERATION
] to start watching.
FUNC
] to start the memory scan.
FUNC
] to start the watching.
FUNC
8
32