Selecting A Memory Channel; Viewing The Memory Channel Contents - Icom ID-52E PLUS Basic Manual

■ Selecting a Memory channel

In the Memory mode, you can select the Memory channels by rotating [DIAL].
1. Push [MR] to enter the Memory mode.
L For only the ID-52A PLUS, pushing [MR] alternately selects the Memory and Weather
Channel modes.
2. Rotate [DIAL].
• Selects a Memory channel.
L To select the Memory group, push [QUICK], and then select "Group Select."
L Blank channels are not selected.
Memory group number
and channel number

■ Viewing the Memory channel contents

You can view the Memory channel contents on the MEMORY screen.
Example: Viewing the contents of Channel 01 in Group 00.
[MENU] > MEMORY > Memory CH
1. Push [MENU].
2. Select "MEMORY" on page 2 of the MENU screen.
3. Select "Memory CH."
4. Select Group "00."
5. Select Channel "01."
• Channel contents are displayed.
L Rotate [DIAL] to scroll the screen.
L To exit the MENU screen, push [MENU].
MEMORY OPERATION
TIP: To sequentially select a channel
in a different group
Set "Channel Select Group Range" to
"All Groups" in the Quick Menu window.
5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
24