Removing The Piston; Removing The Rotor - Husqvarna FS 450 2016 Repair Manual

17 ENGINE
17.3.13
17.3.14
176

Removing the piston

Removing the rotor

-
Push the cylinder upward.
Info
Only push the cylinder as far up as necessary to take
the piston pin out.
Remove piston ring lock
-
Remove the piston pin.
-
Take off the cylinder and piston.
-
Push the piston upward out of the cylinder.
Info
If no further work is to be performed on the cylinder
and piston, the piston can remain in the cylinder.
-
Remove cylinder base gasket (D.
Info
Ensure locating pins
-
Remove timing chain guide rail
O
-
Remove nut with the spring washer.
0-
8
remain in place.
C,
from the top.
..