Adding Engine Oil - Husqvarna FS 450 2016 Repair Manual

Adding engine oil

Info
Too little engine oil or poor-quality engine oil results in premature wear of the engine.
I
iii-0
C5
20.5
20 LUBRICATION SYSTEM
Finishing work
-
Check the engine oil level.
Main work
O
-
Remove oil filler plug
cover.
-
Fill engine oil to the middle
-
Add the same engine oil that was used when the last oil
change was carried out.
I
Engine oil (SAE 1 0W/50)
• Info
I
For optimal performance of the engine oil, do not mix
different types of engine oil.
If appropriate, change the engine oil.
-
Install and tighten the oil filler plug with 0-ring.
Danger
Danger of poisoning
inhaling them may result in unconsciousness and
death.
-
Always make sure there is sufficient ventilation
when running the engine.
-
Use an effective exhaust extraction system when
starting or running the engine in an enclosed
space.
-
Start the engine and check that it is oil-tight.
Finishing work
-
Check the engine oil level.
Main work
-
Place a suitable container under the engine.
O.
-
Remove screws Remove the oil filter cover with the 0-
ring.
-
Remove the oil filter.
I
Lock ring plier (51012011000)
(� p. 249)
with the 0-ring from the clutch
f)
of the level viewer.
(a p. 286)
Exhaust gases are toxic and
(a p. 249)
(a p. 293)
253