17
ENGINE
17 .3.12
Removing the cylinder head
17 .3.13
Removing the piston
O.
-
Remove screw
8
-
Unscrew screws
in a crisscross pattern and remove.
-
Remove the cylinder head.
-
Take off dowels@).
-
Remove cylinder head gasket
-
Push the cylinder upward.
•
Info
I
Only push the cylinder as far up as necessary to take the piston pin out.
-
Remove the piston pin retainer
-
Remove the piston pin.
-
Take off the cylinder and piston.
-
Push the piston upward out of the cylinder.
•
Info
I
If no further work is to be performed on the cylinder and piston, the piston
can remain in the cylinder.
8
-
Take off dowels
and cylinder base gasket@).
C,.
O.
135