17 ENGINE
17.5.34
17.5.35
238
Installing the clutch push rod
Installing the oil screens
-
Oil the O-ring of the oil filter cover.
8.
-
Mount oil filter cover
-
Mount and tighten screws@).
Guideline
I
I
Screw, oil filter cover
O.
-
Mount clutch push rod
-
Mount and tighten screw plug
and the O-ring.
Guideline
Screw plug, oil
screen
-
Position the long oil screen with the O-rings on a pin wrench.
-
Position the pin wrench through the drilled hole of the screw
plug in the opposite section of the engine case.
Push the oil screen all the way into the engine case.
-
Mount and tighten screw plug
Guideline
Screw plug, oil
screen
M6
110 Nm (7.4 lbf ft)
O
with the short oil screen
M20x1.5
15 Nm (11 .1 lbf ft)
8
with the O-ring.
M20x1.5
15 Nm (11 .1 lbf ft)
•