Table of Contents
Advertisement
20
LUBRICATION SYSTEM
254
-
Position special tool @ with the O-ring. Mount and tighten
the screws.
Guideline
I
I
Screw, oil filter cover
I Oil pressure adapter (79429094000)
-
Connect the pressure tester to the special tool without the T
plate.
I Pressure testing tool (61029094000)
-
Check the engine oil level.
Danger
Danger of poisoning
inhaling them may result in unconsciousness and
death.
-
Always make sure there is sufficient ventilation
when running the engine.
-
Use an effective exhaust extraction system when
starting or running the engine in an enclosed
space.
-
Start the engine and let it warm up.
-
Check the engine oil pressure.
Engine oil pressure
Engine oil temperature:
80 °C (176 °F)
Engine speed:
1,600 rpm
Engine oil temperature:
80 °C (176 °F)
Engine speed:
6,000 rpm
If the measured value is less than the specification:
-
Check the oil pumps for wear. Check all oil channels
for free flow.
-
Switch off the engine.
Warning
Danger of burns
very hot when the machine is driven.
-
Wear appropriate protective clothing and safety
gloves. In case of burns, rinse immediately with
lukewarm water.
-
Remove the special tools.
-
Grease the O-ring of the oil filter cover. Mount the oil filter
cover.
-
Mount and tighten the screws.
M6
110 Nm (7.4 lbf ft)
(!!ll
p. 301)
(0
p. 296)
(0
p. 249)
Exhaust gases are toxic and
1.0 bar (15 psi)
1 . 7 bar (25 psi)
Some vehicle components get
Advertisement
Table of Contents
