Husqvarna FS 450 2016 Repair Manual page 40

6 FORK, TRIPLE CLAMP
38
200670-10
e
I
-
Sand the edges of the sliding bushings with 600 grit sandpa­
per; then clean and grease the bushings.
I Fork oil (SAE 4) (48601166S1)
C,.
-
Push on support ring
-
Push on lower sliding bushing
-
Mount upper sliding bushing (D.
Info
Without using a tool, pull the stack slightly apart by
hand.
-
Warm up the outer tube in area
ing.
Guideline
I 50 oc (122 OF)
-
Push the outer tube on.
-
Hold the lower sliding bushing with the longer side of the
special tool.
I Mounting tool (T1 4040S)
-
Press the outer tube all the way in.
-
Position the support ring.
-
Hold the seal ring with the shorter side of the special tool.
I Mounting tool (T1 4040S)
-
Press the outer tube all the way in.
-
@.
Mount lock ring
Info
The lock ring must engage audibly.
(l!!ll p. 286)
0.
f)
of the lower sliding bush­
(l!!ll p. 308)
(l!!ll p. 308)