17 ENGINE
17.3.12
17.3.13
184
cylinder head, removing
Removing the piston
O
Remove nut
with the washer.
8
Loosen nuts
in a crisscross pattern and remove them
with the washers.
Remove the cylinder head.
Remove cylinder head gasket
8.
Remove dowels
Push the cylinder upward.
Info
Only push the cylinder as far up as necessary to take
the piston pin out.
Remove the piston pin retainer
Remove the piston pin.
-
Take off the cylinder and piston.
Push the piston upward out of the cylinder.
Info
If no further work is to be performed on the cylinder
and piston, the piston can remain in the cylinder.
8.
O.