Table of Contents
Advertisement
Main work
O.
Remove shaft seal ring
8.
Remove lock ring
@).
Remove shaft seal ring
Using a suitable tool, press bearing
the outside.
0.
Remove spacing tube
Using a suitable tool, press bearing Q) out from the inside to
the outside.
Check spacer washer @ for damage and wear.
If the spacer washer is damaged or worn:
Replace the spacer washer.
Position spacer washer @.
Press new bearing Q) all the way in from the outside to the
inside.
Info
Only press the bearing in via the outer ring otherwise
the bearing will be damaged when it is pressed in.
14 WHEELS
8
out from the inside to
133
Advertisement
Table of Contents
