Installing The Freewheel Gear; Installing The Primary Gear - Husqvarna FS 450 2016 Repair Manual

17.5.7

Installing the freewheel gear

17.5.8

Installing the primary gear

-
Mount the left section of the engine case. If necessary, strike
lightly with a rubber mallet.
• Info
I
Do not use the screws to pull the two sections of the
engine case together.
8,
-
Mount screws but do not tighten yet.
Guideline
I I
Screw, engine case
fD,
-
Mount screws but do not tighten yet.
Guideline
I I
Screw, engine case
8
-
Mount screws and tighten all screws in a crisscross pat­
tern.
Guideline
I I
Screw, engine case
-
Mount the O-ring on the countershaft.
Lightly grease and mount spacer
O.
Mount freewheel gear
O.
-
Mount woodruff key
-
Degrease the cone and thinly apply thread locker to it.
I
Loctite 243
® ™
Mount primary gear@.
Info
Turn the freewheel gear to ease engagement.
M6x60 10 Nm (7.4 lbf ft)
M6x70 110 Nm (7.4 lbf ft)
10 Nm (7.4 lbf ft)
M6x80
0.
17 ENGINE
223