Removing The Piston; Rotor, Removing - Husqvarna FC 250 2016 Repair Manual

17 .3.13

Removing the piston

17.3.14

rotor, removing

Remove cylinder head gasket (5).
C,.
Remove dowels
Push the cylinder upward.
Info
Only push the cylinder as far up as necessary to take
the piston pin out.
Remove the piston pin retainer
Remove the piston pin.
Take off the cylinder and piston.
Push the piston upward out of the cylinder.
Info
If no further work is to be performed on the cylinder
and piston, the piston can remain in the cylinder.
Take off cylinder base gasket
O.
Remove screw
17 ENGINE
O.
8.
171