Removing The Heim Joint - Husqvarna FS 450 2016 Repair Manual

9.19 Removin the heim joint
••
9 SHOCK ABSORBER, SWINGARM
-
Check the piston rings for damage and wear.
If damage or a bronze-colored surface is visible:
-
Change the piston.
G02066-10
Condition
The shock absorber has been removed.
-
Clamp the shock absorber into the vise with soft jaws.
-
Remove the collar bushing of the heim joint.
I
Drift (f 1 20)
-
Turn the shock absorber and remove the second collar bush­
ing of the heim joint.
-
Press the heim joint against a lock ring using the special tool.
I
Pressing tool (T1207S)
Remove lock ring
, . -
--.. , . ,
-
Place special tool
8
joint
-
I
.
�-
.r!
Pressing tool (T1207S)
,! ---
u
G02068-10
(0 p. 303)
(!!.,!I p. 304)
O.
6)
underneath and press out heim
using special tool G) .
(0 p. 304)
75