Table of Contents
Advertisement
2 SAFETY ADVICE
2.1
Read this Repair Manual carefully and thoroughly before beginning work. It contains useful information and tips
that will help you repair and maintain your vehicle.
This manual assumes that the necessary special Husqvarna tools and Husqvarna workplace and workshop
equipment are available.
2.2
A number of safety instructions need to be followed to operate the vehicle safely. Therefore, read this manual
carefully. The safety instructions are highlighted in the text and are referred to at the relevant passages.
2.3
A
Note
Indicates a danger that will lead to considerable machine and material damage if the appropriate measures are
not taken.
� Warning
'fi"'
2.4
Special tools are necessary for certain tasks. The tools are not a component of the vehicle, but can be ordered
using the number in parentheses. Example: bearing puller (15112017000)
During assembly, use new parts to replace parts which cannot be reused (e.g. self-locking screws and nuts,
seals, sealing rings, O-rings, pins, and lock washers).
In the case of certain screws, a thread locker (e.g.
instructions.
After disassembly, clean the parts that are to be reused and check them for damage and wear. Change dam
aged or worn parts.
After completing a repair or service work, check the operating safety of the vehicle.
8
Re�air Manual
Safety advice
Info
The vehicle has various information and warning labels at prominent locations. Do not remove informa
tion/warning labels. If they are missing, you or others may not recognize dangers and may therefore be
injured.
Degrees of risk and s�mbols
Danger
Indicates a danger that will immediately and invariably lead to fatal or serious permanent injury if the
appropriate measures are not taken.
Warning
Indicates a danger that is likely to lead to fatal or serious injury if the appropriate measures are not
taken.
Caution
Indicates a danger that may lead to minor injuries if the appropriate measures are not taken.
Indicates a danger that will lead to environmental damage if the appropriate measures are not taken.
Work rules
®
)
Loctite
is required. Apply according to the manufacturer's
Advertisement
Table of Contents
