Table of Contents
Advertisement
17 ENGINE
17.4.44
Check the gear mesh and bearing of starter idler gear
Check the gear mesh and bearing of torque limiter
Check the gear mesh and bearing of freewheel gear
Check freewheel
Check the gear mesh of starter motor
Change the O-ring
Connect the negative cable of a 12 volt power supply to the housing of the starter motor. Connect the posi
tive cable of the power supply briefly with connector of the starter motor.
218
Checking the starter drive
If there is damage or wear:
-
Change the starter idler gear.
If
there is damage or wear:
-
Change the torque limiter.
there is damage or wear:
If
-
Change the freewheel gear or bearing.
C,
for damage and wear when it is disassembled.
there is damage or wear:
If
-
Change the freewheel.
there is damage or wear:
If
-
Change the starter motor.
(D
of the starter motor.
the starter motor does not turn when the circuit is closed:
If
-
Change the starter motor.
-8
0
0 - •
O
for damage and wear.
8
for damage and wear.
8
for damage and wear.
0
for damage and wear.
310086-10
•
Advertisement
Table of Contents
