Removing The Camshaft; Removing The Cylinder Head - Husqvarna FS 450 2016 Repair Manual

17 .3.11

Removing the camshaft

17 .3.12

Removing the cylinder head

Remove screws @.
Take off the chain adjuster with the gasket.
O.
Remove screw Remove the camshaft support plate @.
Pull the camshaft out of the bearing seats. Take the timing
chain off the camshaft gear. Remove the camshaft.
O.
Remove screw
Unscrew screws @ in a crisscross pattern and remove.
Remove the cylinder head.
Take off dowels (i).
Remove cylinder head gasket
17 ENGINE
C,.
175