Table of Contents
Advertisement
17 ENGINE
164
-
Position the brake line in the guide.
-
Mount the foot brake cylinder on push rod
•
Info
I
Ensure that the dust boot is correctly seated.
Mount and tighten screws
Guideline
Remaining screws,
chassis
-
Position the linkage lever.
-
Mount and tighten fitting
Guideline
Nut, linkage lever to
angle lever
Info
Raise the wheel slightly to be able to mount the screw
more easily.
-
Mount spring Q).
-
Position the positive cable on the starter motor.
-
Mount and tighten the nut.
Guideline
Remaining nuts,
chassis
Position protection cap @.
@)
and position it.
8.
M6
10 Nm (7.4 lbf ft)
@).
M 14x1 .5
80 Nm (59 lbf ft)
M6
10 Nm (7.4 lbf ft)
Advertisement
Table of Contents
