-
Mount dust boot
-
Mount guide ring G).
-
Mount the preload spacers and spring.
Guideline
Spring rate
Weight of rider: 65 ...
75 kg (143 ... 165 lb.)
Weight of rider: 75 ...
85 kg (165 ... 187 lb.)
201359-10
-
Push the cartridge into the fork leg.
-
Press the cartridge against the spring and mount special
tool@.
I
Support tool (T14020)
Grease the O-ring of the rebound adjuster.
I
Lubricant (T158)
-
Mount the rebound adjuster.
✓ The rebound adjuster must reach the stop before the
piston rod turns with it. If the threads on the piston rod
are tight, it must be held to keep it from turning.
X If the rebound adjuster is not turned all the way to the
stop, the rebound damping cannot be correctly adjusted.
@)
-
Hold nut
Guideline
Rebound adjuster on
the piston rod
-
Press the cartridge against the spring and remove special
tool@.
Tighten the rebound adjuster.
Guideline
Rebound adjuster on
the axle clamp
6 FORK, TRIPLE CLAMP
0-
4.8 N/mm (27.4 lb/in)
5.0 N/mm (28.6 lb/in)
(a
p. 306)
(a
p. 288)
and tighten the rebound adjuster.
M12x1
M20x1
30 Nm (22.1 lbf ft)
30 Nm (22.1 lbf ft)
39