Table of Contents
Advertisement
Adjusting the basic �osition of the clutch lever
7.4
Checking the rubber gri s
7 .5
Checking the throttle cable routing
-
Adjust the basic position of the clutch lever to your hand size
by turning adjusting screw
•
Info
I
When the adjusting screw is turned counterclockwise,
the clutch lever moves away from the handlebar.
When the adjusting screw is turned clockwise, the
clutch lever moves closer to the handlebar.
The range of adjustment is limited.
Turn the adjusting screw by hand only, and do not
apply any force.
Do not make any adjustments while riding.
-
Check the rubber grips on the handlebar for damage, wear,
and looseness.
Info
The rubber grips are vulcanized onto a sleeve on the
left and onto the handle tube of the throttle grip on the
right. The left sleeve is clamped onto the handlebar.
The rubber grip can only be replaced with the sleeve
or the throttle tube.
401197-01
If a rubber grip is damaged or worn:
-
Change the rubber grip.
-
Check that screw
I
Guideline
Screw, fixed grip
I
The diamond
Preparatory work
-
Remove the right side cover.
-
Remove the air filter box cover.
-
Remove the seat.
-
Remove the fuel tank.
7 HANDLEBAR,CONTROLS
0-
O
is firmly seated.
I 5 Nm (3.7 lbf ft)
G
must be located at the top.
(�
p. 101)
(�
p. 97)
(�
p. 101)
(�
p. 103)
..
..
51
Advertisement
Table of Contents
