Table of Contents
Advertisement
14 WHEELS
filJ � [
I
14.6.2
Warning
-
-
120
�()(
�®
�◊)
H00934-11
Installing the front wheel
Oil or grease on the brake discs reduces the braking effect.
Danger of accidents
Always keep the brake discs free of oil and grease.
Clean the brake discs with brake cleaner when necessary.
H00935-10
-
Remove spacers
I
-
Check the wheel bearing for damage and wear.
If the wheel bearing is damaged or worn:
-
Change front wheel bearing.(� p. 121)
-
Clean and grease shaft seal rings
6)
surfaces
of the spacers.
I Long-life grease
-
Insert the spacers.
Info
Insert the wide spacer on the brake disc side.
Insert the narrow spacer on the opposite side.
-
Clean and grease the wheel spindle.
I Long-life grease
-
Position the front wheel and insert the wheel spindle.
-
Mount and tighten screw
Guideline
Screw, front wheel
spindle
-
Position the brake caliper. Mount screws
C,
ers
but do not tighten yet.
✓ The brake linings are correctly positioned.
-
Operate the hand brake lever repeatedly until the brake lin
ings are in contact with the brake disc and there is a pressure
point. Fix the hand brake lever in the activated position.
✓ The brake caliper straightens.
-
Tighten screws
Guideline
Screw, front
brake caliper
-
Remove the locking piece of the hand brake lever.
0.
O
and contact
(�
p. 288)
(!!;!I
p. 288)
@.
M24x1.5
45 Nm (33.2 lbf ft)
8
8.
M10x1.25
45 Nm (33.2 lbf ft)
with wash
®
Loctite
243
™
Advertisement
Table of Contents
