AGFA SelectSet Avantra Series Operating Manual page 86

2–50 SelectSet Avantra Series Control Panel and Operating Guide
Switch Supplies: Use this function when the supply rollers are not set
to the correct position for the supply cassette that you want to load or
remove.
Reverse Feed: Use this function to unload media when a media jam or
carriage jam prevents you from using Unload in the Pause screen.
Rewinds media into the supply cassette without making a Feed and
Cut and without centering the media shields in the drum. If there is
media in the take-up cassette, press Cut before Reverse Feed.
Move Flapper: Avantra 30, 36, and 44 only. Use this function to
move the flapper, which holds media against the drum, before clearing
media jams.
Bridge Shuttle/Weight: Avantra 36 and 44 only. On imagesetters with
on-line processing, use this function to put the bridge in light mode.
That is, use this to shift the weight of the bridge back, which makes it
easier and safer to raise the bridge. Once you lower the bridge again,
it automatically returns to heavy mode.
Note: If you press the Bridge Shuttle/Weight button to place the
bridge in light mode and do not raise the bridge within 25 sec-
onds, it automatically returns to heavy mode.